Hood System: KHES108481216 10'-0" X 48" X 24" Heavy Duty appliance line up to 36" char-broiler
Includes: UL listed to ANSI/UL710
18ga 400 series stainless steel exposed construction
Standard left and right cheeks
(3) incandescent light fixtures with glass globe
Stainless steel filters
Right grease cup
Built in 3" rear standoff
24" x 10" exhaust collar.
Includes a 16" slotted diffuser supply plenum.
2600 EXHAUST CFM
2080 SUPPLY CFM

Note: Not a "Hybrid hood". All surfaces seen by the eye are stainless steel.

Exhaust Fan: 20" Direct drive, aluminum up-blast, UL762, exhaust fan-20" Direct drive
Aluminum up-blast - UL762
Exhaust fan with 1hp/115v/1ph motor with variable speed controller.
(Hinges, grease trough and gasket kit optional)

Supply Fan: -KC-F30010-1-1 Rooftop Supply Fan - 1HP/115v/ 1ph, 60Hz.
Features:
Galvanized housing
Belt drive
Bottom discharge
Mesh filters
Lockout non-fused disconnect switch
Hurricane Rated Florida Product Approval.
From 1501 thru 2650 cfm @.50 esp.

Note: Drive package varies based on required cfm and esp. Size 2 curb required.

Wall Panels Behind the Hood:
Stainless steel wall panels behind the hood
Panels are width of hood and go 3-4" above bottom edge of hood. Does not include adhesive to secure or caulking. These are consumable materials supplied by the installer. Panel size(s) Includes (3) 39.91" x 84" 430 stainless panel, (2) 84" divider bar and (2) 120" end caps. Note: Price is when supplied with a hood. For wall panels only additional crating fees and shipping fees will need to be quoted.Panels are width of hood and go 3-4" above bottom edge of hood.
Does not include adhesive to secure or caulking.
These are consumable materials supplied by the installer.
Note: Price is based on shipping in an additional crate.


Wall Panels Beyond Hood on left or right:
Stainless steel wall panel to go beyond hood on left or right side
Does not include adhesive to secure or caulking. These are consumable materials supplied by the installer. Panel size Includes (1) 19" x 120" 430 stainless panel, (1) 120" divider bar.

Note: